XDA-AMP5400RK

Localizador tiendas

Click here for dimension drawing

		XDA-AMP5400RK
Multi-Room Amplifier
Audio Specifications	Channel	8 channel (2 channel x 4)
	Minimum Speaker load Capability	4 ohm
	BTL Connection	Yes
	Speaker Output Terminal	4 (Euroblock)
	Audio Input Terminal	RCA: 4
	Audio Output Terminal	RCA (2-ch through out): 4
	Trigger In / Out	4 / 4
	Remote In / Out	1 / 1
	Rated Output Power (1 kHz, 0.9% THD, 2ch driven)	Normal (4 / 8 ohms): 90 / 50 W, Bridge (8 ohms): 100 W
	Rated Output Power (1 kHz, 0.9% THD, 1ch driven)	Normal (4 / 8 ohms): 100 / 50 W, Bridge (8 ohms):200 W
	Dynamic Power (20 Hz-20 kHz, 0.08% THD, 2ch driven, 20 ms burst)	Normal (4 / 8 ohms): 80 / 40 W, Bridge (8 ohms): 150 W
	Dynamic Power (1 kHz, 0.9% THD, 2ch driven, 20 ms burst)	Normal (4 / 8 ohms): 100 / 50 W, Bridge (8 ohms): 200 W
	Dynamic Power (1 kHz, 0.9% THD, All ch driven, 20 ms burst)	Normal (4 / 8 ohms): 80 / 50 W, Bridge (8 ohms):170 W
	Maximum Effective Output Power	[1-ch driven, 1 kHz, 10% THD] Normal (4 / 8 ohm):130 / 65 W, Bridge (8 ohm): 260 W
	Total Harmonic Distortion	[SP OUT, 20 Hz-20 kHz, 25 W, 8 ohm] 0.04%
	Frequency Response	[1 kHz + 0 / -3 dB] SP OUT AUX IN: 5 Hz-40 kHz
	Signal to Noise Ratio	[SP OUT AUX IN] 108 dB
	Maximum Input Signal	[PRE OUT L / R, 0.9% THD] 1 V
	Gain	[SP OUT 1 V Input] 25.8 dB
	Input Sensitivity	[1 W Power, 8 ohm] 150 mV, [MAX (50W) Power, 8 ohm] 1.0 V
General	Power Consumption	130 W, [All Zone On] No Signal Condition: 32 W, [All Zone Off] Audio Sense On: 14.8 W
	Standby Power Consumption	Audio Sense Disable: 0.3 W, Audio Sense Enable / Mode Standby: 0.5W
	Power Management (Auto Power Standby)	Yes (On / Off)
	Dimension (W × H × D) mm	[Table Top Mount with Adhesive Feet] 437 x 46 x 443 mm; 17-1/4” x 1-3/4” x 17-3/8”, [Table Top Mount with Adhesive Feet and Faceplate] 437 x 46 x 453 mm; 17-1/4” x 1-3/4” x 17-7/8”, [Rack Mount] 481 x 44 x 443 mm; 18-7/8” x 1-3/4” x 17-3/8”, [Rack Mount with Faceplate] 481 x 44 x 453 mm; 18-7/8” x 1-3/4” x 17-7/8”
	Weight	6.0 kg; 13.2 lbs.